ADEN

Where is the serial number on my system?

Serial numbers of Thinlabs All-In-One Systems and Box Modules are 12 digits in length; serial numbers of ADITI Lithium Ion Batteries are 6 digits in length.

Certification stickers with serial numbers are located on the back of box client modules.

On integrated thin clients, there is a certification sticker on the back of the system;
newer models also have a 2nd serial number sticker either on the left side bezel or on the bottom of the bezel.

If the certification sticker has been destroyed, contact Thinlabs Support.

------

How do I setup dual display support on my Windows 7 system?


For KREIOS (TL10 model) quadcore thin client box modules, connect the first monitor to the VGA port and the second monitor to either the HDMI or DVI-D port.

For TALOS (TL30), ORION (TL60) and ADEN (TL50) thin client box modules, connect the first monitor to the VGA port and the second monitor to the DVI-D port.

-----

For all-in-one integrated thin client computers with Quadcore-based processors (TL23, TL24, TL25, TL26, TL85, TL86 models), connect the second monitor to either the VGA or HDMI port.

For all-in-one integrated thin client computers with Dualcore-based processors (TL21, TL22, TL74, TL83, TL84 models), connect the second monitor to the VGA port.

For all-in-one integrated thin client computers with ATOM-based processors (TL71, TL72, TL91, TL92 models), an additional VGA port will need to be installed to your system. Connect the second monitor to the VGA port.

See the Microsoft knowledgebase article - Dual Monitor Setup is Easy in Windows 7 for more information.

-----

I get a "Blue Screen of Death" on my system


Here is a checklist of tasks to try if receiving a BSOD on your screen:

  • Check the Virtual Memory settings to see if they've been adjusted from Thinlabs factory defaults.
  • Ensure Pagefile is Disabled if using an Embedded product with EWF set to Enabled.
  • Remove any user-installed software or drivers, one at a time, rebooting after each removal (be sure that EWF is Disabled first).
  • Reload the firmware.
  • Replace the RAM.
  • Reimage the disk.

-----

Pages